Tweet
[3/18/2016 1:39:51 PM] [START OPERATION_ID = RESURRECT]
[3/18/2016 1:39:51 PM] Open serial port...OK
[3/18/2016 1:39:51 PM] Connecting to the RIFF Box...OK
[3/18/2016 1:39:51 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[3/18/2016 1:39:51 PM] Selected Resurrector: [Samsung E110S V1.0.4724.40646]
[3/18/2016 1:39:51 PM]
[3/18/2016 1:39:51 PM] Connecting to the dead body...ERROR
[3/18/2016 1:39:51 PM] ERROR: The RTCK Signal does not respond.
[3/18/2016 1:39:51 PM] [FINISH OPERATION_ID = RESURRECT]
[3/18/2016 1:40:07 PM] [START OPERATION_ID = RESURRECT]
[3/18/2016 1:40:57 PM] Open serial port...OK
[3/18/2016 1:40:57 PM] Connecting to the RIFF Box...OK
[3/18/2016 1:40:57 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[3/18/2016 1:40:57 PM] Selected Resurrector: [Samsung E110S V1.0.4724.40646]
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Connecting to the dead body...OK
[3/18/2016 1:40:57 PM] Detected dead body ID: 0x106A10E1 - CORRECT!
[3/18/2016 1:40:57 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
[3/18/2016 1:40:57 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Resurrection sequence started.
[3/18/2016 1:40:57 PM] Establish communication with the phone...OK
[3/18/2016 1:40:57 PM] Initializing internal hardware configuration...OK
[3/18/2016 1:40:57 PM] Uploading resurrector data into memory...OK
[3/18/2016 1:40:57 PM] Starting communication with resurrector...OK
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[3/18/2016 1:40:57 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB)
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Flashing the dead body...OK
[3/18/2016 1:40:57 PM] Resurrection complete!
[3/18/2016 1:40:57 PM] [FINISH OPERATION_ID = RESURRECT]
[3/18/2016 1:39:51 PM] Open serial port...OK
[3/18/2016 1:39:51 PM] Connecting to the RIFF Box...OK
[3/18/2016 1:39:51 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[3/18/2016 1:39:51 PM] Selected Resurrector: [Samsung E110S V1.0.4724.40646]
[3/18/2016 1:39:51 PM]
[3/18/2016 1:39:51 PM] Connecting to the dead body...ERROR
[3/18/2016 1:39:51 PM] ERROR: The RTCK Signal does not respond.
[3/18/2016 1:39:51 PM] [FINISH OPERATION_ID = RESURRECT]
[3/18/2016 1:40:07 PM] [START OPERATION_ID = RESURRECT]
[3/18/2016 1:40:57 PM] Open serial port...OK
[3/18/2016 1:40:57 PM] Connecting to the RIFF Box...OK
[3/18/2016 1:40:57 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[3/18/2016 1:40:57 PM] Selected Resurrector: [Samsung E110S V1.0.4724.40646]
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Connecting to the dead body...OK
[3/18/2016 1:40:57 PM] Detected dead body ID: 0x106A10E1 - CORRECT!
[3/18/2016 1:40:57 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
[3/18/2016 1:40:57 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Resurrection sequence started.
[3/18/2016 1:40:57 PM] Establish communication with the phone...OK
[3/18/2016 1:40:57 PM] Initializing internal hardware configuration...OK
[3/18/2016 1:40:57 PM] Uploading resurrector data into memory...OK
[3/18/2016 1:40:57 PM] Starting communication with resurrector...OK
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[3/18/2016 1:40:57 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB)
[3/18/2016 1:40:57 PM]
[3/18/2016 1:40:57 PM] Flashing the dead body...OK
[3/18/2016 1:40:57 PM] Resurrection complete!
[3/18/2016 1:40:57 PM] [FINISH OPERATION_ID = RESURRECT]