J500F hynix"H8G4u" qualcomm HS-USB 9008

[ZameerAhmed]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 4 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x90
OEM/Application ID ................... 0x4A
Product Name ......................... "H8G4u " ========
Package .................................. BGA
User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................... 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ........................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits .................. NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x00, [162] = 0x01
Boot Configuration .................... No Boot
Chip Revision ........................... 0.1
Multimedia Card Revision ........... 1.7 (eMMC v5.0)
Serial Number .......................... 0x1034F01E
Memory Manufacturing Date ....... May, 2016


Need dump file for j500f hynix h8g4u ??


thanks

[mtk6572s4clone]

Hi, try to look build.prop for current firmware installed, and re-flash that same and/or higher firmware BL tar.md5 on emmc plugin.

P.S.: Did you get connected by ISP or by direct connection?

Greetings.

[ZameerAhmed]

J500F hynix"H8G4u" qualcomm HS-USB 9008 Same Problem

J500F-XXU1BRC1_BL tar.md5 ...Flash selected partitions full. But Not download mode

[Legija]

Latest bootloader must work if HW is okay.
In Qualcomm Samsung models is also important gpt + unalocated space (from 0x0 to 0x400000) where model id info is stored.


So, resurrection + latest bootloader must be enough for download mode, if HW is okay and there is no faults.

[ZameerAhmed]

H8G4u Problem on This Emmc

Mr.Legija Can Someone Areng For mi 1GB Dump (J500F-XXU1BRC1) Dump File


Coz. J500F hynix"H8G4u" qualcomm HS-USB 9008 Problem Not solving



Emmc QN16MB i Repaired 2P. Before. hynix"H8G4u Problem on This Emmc


Thanks Br.Legija

[Legija]

J500fxxu1aok5
After writing this file, write latest bootloader. If phone remains in 9008 mode it's HW problem.

[ZameerAhmed]

it's" very interesting Story J500F hynix"H8G4u" qualcomm

Just a moment...


it's" very interesting Story J500F hynix"H8G4u" qualcomm msm8916
Lake Givet to mi file G532G_User_Area.rar (324M) 1GB



i think nead 1GB File

[Legija]

Read 128mb from phone and upload here. Possibly emmc is read only ?

[ZameerAhmed]

512MB-Userarea bin

Read 128mb from phone and upload here. Possibly emmc is read only ?

512MB-Userarea.....................

[Legija]

Data looks okay, so there is two possible reasons for phone to be in 9008 mode.
1. This is not J500F but another variation (J500FN for example)
2. HW is not ok (DRAM or eMMC)


Write this 128mb dump to sd card as image file, insert card into phone, insert full charged battery, press vol-+home+pwr. If emmc is bad but other hw is ok phone should vibrate and enter download mode.

[ZameerAhmed]

Mr. Legija. Thank you so much.(J500F-XXU1BRC1) Dead After flash this File



i will be try

[leventc]

why fownload this file ? Mr Legija help me

[arodcapi]

emmc damage or software boot problem is the 9008 code