Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81
Selected Resurrector: [HTC Desire D728w (2PQ81000) ISP V1.0.6729.12021, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 2.50 MHz
Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000B])
tried every possibility but same error appeared.
connections good.
thanks.
Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81
Selected Resurrector: [HTC Desire D728w (2PQ81000) ISP V1.0.6729.12021, <RJ-45>, 1 Bit Bus Width (DAT0)]
Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 2.50 MHz
Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000B])
tried every possibility but same error appeared.
connections good.
thanks.
Comment