G532G After repair boot only show mtk usb driver [Solved with RIFF by bootloader update]

[mzc1993]

hi guys

i repair boot G532G with resurrection tab but after boot repair done only show mtk usb driver in device manager...


please share Samsung G532G Boot partition 1 + user area partition for repair boot in emmc tab.

tanks


info:

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x90
OEM/Application ID ................... 0x4A
Product Name ......................... "H8G4u "
Package .............................. BGA
User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x48, [162] = 0x01
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 0.1
Multimedia Card Revision ............. 1.7 (eMMC v5.0)
Serial Number ........................ 0x28C3721A
Memory Manufacturing Date ............ November, 2017

[Legija]

SM-G532G_User_Area.rar - Google Drive

[mzc1993]

SM-G532G_User_Area.rar - Google Drive

very tanks mr legija i write user area partition.

and now no any sign show in device manager

excuse me,can you share boot area partition?

would you teach fishing? How do I backup (boot partition and user area partition) a normal phone without jtag?

[Legija]

Very possible that emmc is bad, and that is why phone is not repaired.
Resurrector restores boot partition and other important data in user area partition.


Please do this:


1. On eMMC TAB select user area partition and read 128MB, save, compress and attach here.
2. Read boot partition 1 full, do the same


I need to check if content as it should be.

[mzc1993]

Very possible that emmc is bad, and that is why phone is not repaired.
Resurrector restores boot partition and other important data in user area partition.


Please do this:


1. On eMMC TAB select user area partition and read 128MB, save, compress and attach here.
2. Read boot partition 1 full, do the same


I need to check if content as it should be.

this phone bricked after flash with 4 file firmware

i did in emmc/sd tab select user area partition and file 1GB (SM-G532G_User_Area) and select data length auto file size then write to phone...file burned after 2-3 hour...thats right? no any file write in boot partition1

[Legija]

Ok, thank You.


Both files look ok, which means there could be another problem. I'm not sure if there is antirollback protection on these models (probably not) but just in case there is You should download latest bootloader tar.md5 file and flash it using eMMC plugin.


Otherwise make sure that battery is fully charged, phone must enter download mode now.


To flash bootloader file, follow these steps:


1. Start eMMC Plugin and select ISP connection
2. Click "Parse connected memory"
3. Click "Parse official firmware" and select bootloader *.tar.md5 file (for example "BL_G532GDXU1AQI2_CL12327063_QB15069235_REV00_need stockrom_user_low_ship_MULTI_CERT.tar.md5"
4. Click "Flash selected partitions full"


This will restore bootchain partitions and if HW is okay phone must enter bootloader mode.

[mzc1993]

Ok, thank You.


Both files look ok, which means there could be another problem. I'm not sure if there is antirollback protection on these models (probably not) but just in case there is You should download latest bootloader tar.md5 file and flash it using eMMC plugin.


Otherwise make sure that battery is fully charged, phone must enter download mode now.


To flash bootloader file, follow these steps:


1. Start eMMC Plugin and select ISP connection
2. Click "Parse connected memory"
3. Click "Parse official firmware" and select bootloader *.tar.md5 file (for example "BL_G532GDXU1AQI2_CL12327063_QB15069235_REV00_need stockrom_user_low_ship_MULTI_CERT.tar.md5"
4. Click "Flash selected partitions full"


This will restore bootchain partitions and if HW is okay phone must enter bootloader mode.

this phone repaired successfully and show download mode

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.50 (RIFFBOX1), JTAG Manager Version: 1.80

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.21V, SD_CLK Frequency is 649 KHz

Detected eMMC Chip, ID: 0x90/0x4A (H8G4u ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000003FFFFF
Completed in 00:00:51.109 (Average Transfer Rate: 80.14 kB/s)

Writting "User Area Partition" memory from 0x000001000000 to 0x0000011FFFFF
Completed in 00:00:25.828 (Average Transfer Rate: 79.29 kB/s)

Writting "User Area Partition" memory from 0x000001B80000 to 0x000001BFFFFF
Completed in 00:00:06.484 (Average Transfer Rate: 78.96 kB/s)

Writting "User Area Partition" memory from 0x000001C00000 to 0x0000021FFFFF
Completed in 00:01:17.047 (Average Transfer Rate: 79.74 kB/s)

Writting "User Area Partition" memory from 0x000005000000 to 0x0000057FFFFF
Completed in 00:01:42.656 (Average Transfer Rate: 79.80 kB/s)



big tanks mr legija i like you

[Legija]

Ok, we'll update DLL with new data then.

[eddymarchan]

sm-g532m muerto por frp

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.82
Selected Resurrector: [Samsung G532M ISP V1.0.6725.6469, <JTAG>, 1 Bit Bus Width (DAT0)]

Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 3.21V, SD_CLK Frequency is 400 KHz

Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000B])

[eddymarchan]

quien facilita la img del cable rj45 ya que necetito hacer un g532m

[Legija]

Click "RIFF BOX Pinout" button.
Also, You need to select RJ45 on SD/MMC interface selection box.