Announcement

Collapse
No announcement yet.

Direct Bga emmc read info done....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Direct Bga emmc read info done....

    Riff V1 direct bga emmc read info done, here log -

    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81
    Selected Manual Mode: [Qualcomm DMSS, External Binary Format File, QCOMM Stream DLoad]

    Connecting to the SD/eMMC Card...OK
    Set I/O Voltage reads as 1.78V, SD_CLK Frequency is 40 KHz

    Memory Type .......................... eMMC
    Manufacturer ID ...................... 0x90
    OEM/Application ID ................... 0x4A
    Product Name ......................... "H8G2d "
    Package .............................. BGA
    User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
    Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
    RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
    OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
    Write Protection Bits ................ NONE
    ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x48, [162] = 0x01
    Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1 Bit)
    Chip Revision ........................ 0.5
    Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
    Serial Number ........................ 0x008CFD45
    Memory Manufacturing Date ............ February, 2014

Working...
X