Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.77
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.79V, SD_CLK Frequency is 4 MHz
Detected eMMC Chip, ID: 0x65/0x6F (M MOR ), User Area Partition = 0x000075700000 Bytes (1.83 GB)
Reading "User Area Partition" address space from 0x000000000000 to 0x00001FFFFFFF
ERROR: Read Failed with Error Code: (17:62). Terminating at 0x000008000000
Connecting to the RIFF Box...OK
Firmware Version: 1.49 (RIFFBOX1), JTAG Manager Version: 1.77
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.79V, SD_CLK Frequency is 4 MHz
Detected eMMC Chip, ID: 0x65/0x6F (M MOR ), User Area Partition = 0x000075700000 Bytes (1.83 GB)
Reading "User Area Partition" address space from 0x000000000000 to 0x00001FFFFFFF
ERROR: Read Failed with Error Code: (17:62). Terminating at 0x000008000000
Comment