Easy step, convert extcsd to riffsdmmc

[anda utama]

Saya ada masalah dengan Oppo R2001, hang logo, setelah cek dgn SPFlashtool getar aja,(reistor clk sudah saya cabut)
Terdeteksi boot1(4mb), rpmb(4mb), user area(3,64Gb)
Proses read boot1, user area ok, RPMB failed...
Coba Write boot1, Failed..
Apa positif emmc rusak ya?

OPPO R2001
============
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.44 (RIFFBOX1), JTAG Manager Version: 1.68

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.81V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x90
OEM/Application ID ................... 0x4A
Product Name ......................... "H4G1d "
Package .............................. BGA
User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
Chip Revision ........................ 0.5
Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
Serial Number ........................ 0x03A24BAF
Memory Manufacturing Date ............ November, 2014
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.44 (RIFFBOX1), JTAG Manager Version: 1.68

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.81V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x90/0x4A (H4G1d ), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Write boot1
=========
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.44 (RIFFBOX1), JTAG Manager Version: 1.68

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.81V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x90/0x4A (H4G1d ), User Area Partition = 0x0000E9000000 Bytes (3.64 GB)

Invalid length[0x000000400001]: It should be alighed to 0x00000200

coba masuk tab emmc advance>klik userarea format...
kalo userarea keterangan error....lebih baik ganti emcp

Proses read boot1, user area ok, RPMB failed...

untuk rpmb tidak bisa di tulis karna protek permanent memory..

semoga sukses...

[g4n]

makasih tutorial nya ber manfaat