Samsung i8160

[aga11]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 14.4 MHz
Settings Code: 0x00000F00000000000000000000000000

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x51): Communication is not established. Terminating.
nead help how to soloved seme wied 12mhz

[aga11]

soloved no nead nrst
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3,69GB

Flashing the dead body...OK
Resurrection complete!