Hello all,
I wanted to try the new SD reading features with a known SD card for test.
So I opened my RIFFBOX to place the two pull-ups resistor and upgraded to the latest version of firmware and software, all updates downloaded too.
I soldered on my SD card with CMD,DAT0, CLK and supply pins and it worked fine for the detection :
Then I read my SD card, everything seems to be fine :
Then I saved this reading as a .bin file
But when I read this file it is just the same chunk of 8kb repeating endlessly for 2Gb... This is not even the VBR of my SD card or its first sector... Is there anything I have forgotten to upgrade my RIFFBOX ??
I wanted to try the new SD reading features with a known SD card for test.
So I opened my RIFFBOX to place the two pull-ups resistor and upgraded to the latest version of firmware and software, all updates downloaded too.
I soldered on my SD card with CMD,DAT0, CLK and supply pins and it worked fine for the detection :
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62 Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Memory Type .......................... SD Manufacturer ID ...................... 0x02 OEM/Application ID ................... "TM" Product Name ......................... "SD02G" Package .............................. Removable User Area Partition Size ............. 0x000075400000 Bytes (1.83 GB) OCR Register ......................... 0x80FF8000 (High Voltage) Write Protection Bits ................ NONE Chip Revision ........................ 4.8 Serial Number ........................ 0xA6699D33 Memory Manufacturing Date ............ November, 2009
Code:
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62 Connecting to the SD/eMMC Card...OK Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 2.50 MHz Detected SD Chip, ID: 0x02/"TM" (SD02G), User Area Partition = 0x000075400000 Bytes (1.83 GB) Reading "User Area Partition" address space from 0x000000000000 to 0x0000753FFFFF Completed in 00:35:14.110 (Average Transfer Rate: 908.67 kB/s)
But when I read this file it is just the same chunk of 8kb repeating endlessly for 2Gb... This is not even the VBR of my SD card or its first sector... Is there anything I have forgotten to upgrade my RIFFBOX ??
Comment