Announcement

Collapse
No announcement yet.

Is it possible to program 25q16bs ? with eMMC/SD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Is it possible to program 25q16bs ? with eMMC/SD

    Does anyone know if you can progrmamar one of these memoriras ? with the new vercion of RIFF 1.61

    What would be the order of progrmacion pin ?


    VCC
    GND
    DAT
    CMD
    CLK


    thanks for your help

  • #2
    I think you are in the wrong place ...
    This is not emmc, but eeprom.

    no need jtag or direct emmc

    I use this to program it
    Attached Files

    Comment


    • #3
      thanks for answering friend , but my problem still continues , I tried to write a full DUMP in a router that this brick, but I can not read or write memory router .. RIFF if you recognize but can not read or write memory .. . Can anyone help me please?


      Code:
      Open serial port...OK
      Connecting to the RIFF Box...OK
      Firmware Version: 1.39 (RIFFBOX1), JTAG Manager Version: 1.61
      Selected Target: [MIPS32 IR5, 3.30V, TAP0]
      
      Connecting to the MIPS32 IR5 target...OK
      Detected dead body ID: 0x02C10080 - IGNORED!
      Set I/O Voltage reads as 3.31V, TCK Frequency is 12 MHz
      
      Resetting and Halting target...OK
      WARNING: Target was already halted. Reset not worked.
      
        R0 = 0x00000000    R8 = 0xFFFFFFFF    R16 = 0xFFFFFFFF    R24 = 0xFFFFFFFF
        R1 = 0x00000000    R9 = 0xFFFFFFFF    R17 = 0xFFFFFFFF    R25 = 0xFFFFFFFF
        R2 = 0xFFFFFFFF   R10 = 0xFFFFFFFF    R18 = 0xFFFFFFFF    R26 = 0xFFFFFFFF
        R3 = 0xFFFFFFFF   R11 = 0xFFFFFFFF    R19 = 0xFFFFFFFF    R27 = 0xFFFFFFFF
        R4 = 0xFFFFFFFF   R12 = 0xFFFFFFFF    R20 = 0xFFFFFFFF    R28 = 0xFFFFFFFF
        R5 = 0xFFFFFFFF   R13 = 0xFFFFFFFF    R21 = 0xFFFFFFFF    R29 = 0xFFFFFFFF
        R6 = 0xFFFFFFFF   R14 = 0xFFFFFFFF    R22 = 0xFFFFFFFF    R30 = 0xFFFFFFFF
        R7 = 0xFFFFFFFF   R15 = 0xFFFFFFFF    R23 = 0xFFFFFFFF    R31 = 0xFFFFFFFF
        PC = 0x00000000    SR = 0x00400000
      
      Connecting to the OneNAND Memory based at 0xBFC00000...OK
      Detected an Initialized FLASH1 Chip, ID: 0x8865/0x04FD



      Comment


      • #4
        If you can do it in riff ,
        I want to repair laptop bios using riff too ... LOL

        Comment


        • #5
          Yes, and I want to fix my dead HWK module.

          is it possible ?

          Comment


          • #6
            I repair many bios and efi with ATF box.
            And I repair HWK with GPGDragon box.
            Nothing funny. Just facts.) But Riff cant do this

            Comment


            • #7
              I tried to do it with volcano but dobby know where to take 3v from, for vcc, don't have gpg

              Sure it can't be done with riff?

              Enviado desde mi SM-N920T mediante Tapatalk

              Comment

              Working...
              X