Emmc based full flash files, fail, via isp

[equimaxcel]

Always starts by writing in boot area partition 1 . After writing 2mb (boot area partition). The riff does not responding.

writting mbr, mastertoc, pit, empty, md 5hdr, steboot1, steboot2 (8mb size ) in boot area 1 (2mb).

always riff box not responding after write boot area partition, all emmc same problem.


[IMG]]"]ImageShack - Best place for all of your image hosting and image sharing needs[/IMG]

I have tried in i8190 and i9192, same response

solution?


Memory Type .......................... eMMC
Manufacturer ID ...................... 0x45
OEM/Application ID ................... 0x00
Product Name ......................... "SEM08G"
Package .............................. BGA
User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 9.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x0F5DE240
Memory Manufacturing Date ............ October, 2014

[equimaxcel]

Mr legija help me,

[Legija]

Hi,
Please upload here dump file and post information about phone model and brand.
Also complete log from operation would be nice to have.

[equimaxcel]

Hi,
Please upload here dump file and post information about phone model and brand.
Also complete log from operation would be nice to have.

Model i9192
Brand Samsung
EMMC SDIN7DU-8G
writte via EMMC Based Full Flash Image Files

file
4shared.com - free file sharing and storage



read emmc device user area partition perfect. But writte in Boot area partition first 7 Item (mbr, mastertoc, pit, empty, md 5hdr, steboot1, steboot2)

the program no response to writting 0x000000200000 2mb Boot area partition, finished available space ...

Because he does not write everything in User Area Partition?

all files backup from device, all emmc






Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39 (RIFFBOX1), JTAG Manager Version: 1.61

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.32V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x45
OEM/Application ID ................... 0x00
Product Name ......................... "SEM08G"
Package .............................. BGA
User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000200000 Bytes (2.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 9.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x03A02838
Memory Manufacturing Date ............ 2014


Same Problem in Samsung Galaxy i8190, writting in boot area partition after no responding Riff box manager 1.61.

[Legija]

There is bug in eMMC plugin which wrongly interpret partitions listed by emmc controller.

I've prepared PKG file for I9192 so please test it.

I can make any other too, but for i8190 and i8192 I need also "ROM2" - Boot Partition 1 dumps.

Put this file to "RepairPacks" folder.
On models list, select "Samsung I9192 ISP".

[equimaxcel]

There is bug in eMMC plugin which wrongly interpret partitions listed by emmc controller.

I've prepared PKG file for I9192 so please test it.

I can make any other too, but for i8190 and i8192 I need also "ROM2" - Boot Partition 1 dumps.

Put this file to "RepairPacks" folder.
On models list, select "Samsung I9192 ISP".

tanks mr legija, test now

[equimaxcel]

There is bug in eMMC plugin which wrongly interpret partitions listed by emmc controller.

I've prepared PKG file for I9192 so please test it.

I can make any other too, but for i8190 and i8192 I need also "ROM2" - Boot Partition 1 dumps.

Put this file to "RepairPacks" folder.
On models list, select "Samsung I9192 ISP".

[IMG]]"]ImageShack - Best place for all of your image hosting and image sharing needs[/IMG]

PKG was not accepted

[Legija]

Try with 1.62.

[equimaxcel]

I not repair any phone for isp , I tried on a models Samsung I8190 , i9192 , i9195 , i9300.

tested:
emmc/sd access
samsung i9300 fine
copy backup; boot1, boot2, user area 0x000000000000 to 0x000100000000, Cid ext_sdc

erase memory to same i9300

writte: boot1, boot2, user area 0x000000000000 to 0x000100000000, Cid ext_sdc

result: DEAD

witting via EMMC BASED FULL FLASH IMAGE

Result: DEAD

I am doing wrong process or the problem its riff box?

[Tedjo]

I not repair any phone for isp , I tried on a models Samsung I8190 , i9192 , i9195 , i9300.

tested:
emmc/sd access
samsung i9300 fine
copy backup; boot1, boot2, user area 0x000000000000 to 0x000100000000, Cid ext_sdc

erase memory to same i9300

writte: boot1, boot2, user area 0x000000000000 to 0x000100000000, Cid ext_sdc

result: DEAD

witting via EMMC BASED FULL FLASH IMAGE

Result: DEAD

I am doing wrong process or the problem its riff box?

I think you have to rewrite boot1 boot2 and userarea only
without write Cid ext_sdc.
have you check boot1 boot2 and userarea files in hex editor ?
just only 00 or have data inside ?

[Legija]

eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v3.01
-------------------------------------
- fixed Write bug via Direct/ISP eMMC - write is done now to User Partition.

eMMC Plugin v3.01 is uploaded to support, please download it and report results.

[Damianfreemanp]

eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v3.01
-------------------------------------
- fixed Write bug via Direct/ISP eMMC - write is done now to User Partition.

eMMC Plugin v3.01 is uploaded to support, please download it and report results.

hi Legija how do we use RJ45 pinout sorry this is stupid question and i have 1.62
its not letting me update firmware from 1.01 yes i belive thats old i have never flashed a pone with tis box nor read but i want to start now lol

[Tedjo]

eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v3.01
-------------------------------------
- fixed Write bug via Direct/ISP eMMC - write is done now to User Partition.

eMMC Plugin v3.01 is uploaded to support, please download it and report results.

Mr Legija,
Please add save button in bin format for each partition

thank you ..

[silver anjel]

i need please isp for gt-i9195 pinout and files for repair dead phone
thanks in advance!!!

[silver anjel]

and maybe isp emmc pinout jpeg in jtag manager with photos will be very good lige jtag pinout on resuraction
please !!!