Announcement

Collapse
No announcement yet.

JTAG working after Firmware update to 1.39

Collapse
X
Collapse
 
  • Page of 3
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • #31
    1.39 upgrade fails. I get the following message:
    Firmware Upgrade operation failed!!!
    Firmware Upgrade Failed!
    ERROR: Failed to Restart the RIFF Box.
    Click Firmware Update button if you want to try again.

    If I try again the same thing happens. I had no problems upgrading to 1.38 but now that the new version is pushed to the servers it fails to upgrade. Instead I had to downgrade back to 1.37.

    Comment

    • #32
      Originally posted by kurt_077 View Post
      i cant update to 1.39 !!!!!

      Getting RIFF Box Info...OK
      RIFF Box S/N: ****************
      RIFF Box Firmware Version: 1.38.6b



      Open serial port...OK
      Connecting to the RIFF Box...OK

      Getting RIFF Box Info...OK
      RIFF Box Firmware Version: 1.38.6b

      Connecting to the Updates Server...OK
      Downloading new Firmware from Server...ERROR
      I had this same problem before. You need to unblock TCP destination port 8080 for outbound traffic.

      Comment

      • #33
        Apparatus fully working

        Resurrection
        HTML Code:
        Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39, JTAG Manager Version: 1.58
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3,69GB

Flashing the dead body...OK
Resurrection complete!
        DCC Read Error
        HTML Code:
        Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39, JTAG Manager Version: 1.58
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz
Settings Code: 0x01000E00000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Reading MCU address space from 0x000000000000 to 0x00001FFFFFFF
Failed to receive answer to READ command.

        Comment

        • #34
          I got an message to e-mail:

          Please update box firmware to v1.39 the which is on the server now.ARM 9 and ARM11, together with some Cortex cores were tested, but we did not had the opportunity to test on QUALCOMM S3 / S4 TAP and TDMI ARM7 cores.

          Trying update box firmware... and fail

          Code:
          [05.05.2016 23:56:29] ------------------------------- JTAG Manager Session Opened -------------------------------
[05.05.2016 23:56:29] JTAG Manger Version: 1.58
[05.05.2016 23:56:29] -------------------------------------------------------------------------------------------

 
[05.05.2016 23:56:37] [START OPERATION_ID = FIRMWARE_UPDATE]
[05.05.2016 23:56:48] Open serial port...OK
[05.05.2016 23:56:48] Connecting to the RIFF Box...OK
[05.05.2016 23:56:48] 
[05.05.2016 23:56:48] Getting RIFF Box Info...OK
[05.05.2016 23:56:48] RIFF Box Firmware Version: 1.38.6b
[05.05.2016 23:56:48] 
[05.05.2016 23:56:48] Connecting to the Updates Server...OK
[05.05.2016 23:56:48] Downloading new Firmware from Server...ERROR
[05.05.2016 23:56:48] [FINISH OPERATION_ID = FIRMWARE_UPDATE]

[05.05.2016 23:56:54] ------------------------------- JTAG Manager Session Closed -------------------------------
          I am also still waiting and hope for a miracle!!!

          With best regards.
          Ex Beta Tester.

          Comment

          • #35
            The same situation, also tested. Only a limited number of testers received activation as a gift for his help.
            Last edited by Kot_Geniy; 05-05-2016, 11:01 PM.

            Comment

            • #36
              Read eMMC Based FullFlash Image Files Processing Plugin

              HTML Code:
              Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39, JTAG Manager Version: 1.58
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz
Settings Code: 0x01000E00000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Reading FLASH1 address space from 0x00002C900000 to 0x00007A8FFFFF
Completed in 02:04:23.212 (Average Transfer Rate: 171.23 kB/s)

              Comment

              • #37
                jtag resurrection
                Code:
                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39, JTAG Manager Version: 1.58
Selected Resurrector: [Samsung N7000 V1.0.4860.58267]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB

Flashing the dead body...OK
Resurrection complete!
                eMMC info
                Code:
                Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.39, JTAG Manager Version: 1.58

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 2.79V, SD_CLK Frequency is 960 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "S5U00M"
Package .............................. BGA
User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
Boot Partition Size .................. 0x000000100000 Bytes (1.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.2
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x41643E67
Memory Manufacturing Date ............ December, 2012
                v1.39 all good

                Comment

                • #38
                  same with me, can not update to firmware 1.39 ?? i use 1.58 jtag manager, it said succes but still 1.38 , whats wrong ?

                  [5/18/2016 6:23:56 PM] [START OPERATION_ID = FIRMWARE_UPDATE]
                  [5/18/2016 6:24:19 PM] Open serial port...OK
                  [5/18/2016 6:24:19 PM] Connecting to the RIFF Box...OK
                  [5/18/2016 6:24:19 PM]
                  [5/18/2016 6:24:19 PM] Getting RIFF Box Info...OK
                  [5/18/2016 6:24:19 PM] RIFF Box Firmware Version: 1.38
                  [5/18/2016 6:24:19 PM]
                  [5/18/2016 6:24:19 PM] Connecting to the Updates Server...OK
                  [5/18/2016 6:24:19 PM] Downloading new Firmware from Server...OK
                  [5/18/2016 6:24:19 PM]
                  [5/18/2016 6:24:19 PM] Setting Update Mode...OK
                  [5/18/2016 6:24:19 PM] Updating Box's Firmware...OK
                  [5/18/2016 6:24:19 PM] Restarting box, please wait...OK
                  [5/18/2016 6:24:19 PM] Firmware Update Completed OK
                  [5/18/2016 6:24:19 PM]
                  [5/18/2016 6:24:19 PM] Current Firmware Version: 1.38
                  [5/18/2016 6:24:19 PM] [FINISH OPERATION_ID = FIRMWARE_UPDATE]

                  [5/18/2016 6:24:31 PM] [START OPERATION_ID = REGISTER_BOX]
                  [5/18/2016 6:24:45 PM] Open serial port...OK
                  [5/18/2016 6:24:45 PM] Connecting to the RIFF Box...OK
                  [5/18/2016 6:24:45 PM]
                  [5/18/2016 6:24:45 PM] Getting RIFF Box Info...OK
                  [5/18/2016 6:24:45 PM] RIFF Box Firmware Version: 1.38
                  [5/18/2016 6:24:45 PM]
                  [5/18/2016 6:24:45 PM] Connecting to the Updates Server...OK
                  [5/18/2016 6:24:45 PM] Server Response: RIFFBOX is Registered.
                  [5/18/2016 6:24:45 PM] Getting License from the RIFF Server...OK
                  [5/18/2016 6:24:45 PM]

                  Comment

                  • #39
                    Originally posted by gagecell View Post
                    same with me, can not update to firmware 1.39 ?? i use 1.58 jtag manager, it said succes but still 1.38 , whats wrong ?
                    Please contact me via QQ, something very suspicious with Your box.
                    ICQ: 299-912-089
                    QQ: 1634811353

                    Comment

                    • #40
                      Hi, I just purchased 30 credits for activation. How long will it take because I'm urgently needing it.

                      Comment

                      • #41
                        Depends where You purchased it, so You could tell us that for start.
                        ICQ: 299-912-089
                        QQ: 1634811353

                        Comment

                        Previous 1 2 3 template Next
                        Working...
                        X

                        We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                        By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                        I Agree