alson not connect through jtag interface,rj45 only work 960khz
Announcement
Collapse
No announcement yet.
Mr. Legija, Please Add This File In Support For All Riff Box Users...
Collapse
X
-
One click repair Boot Samsung G532G
Открытие порта...OK
Подключение к RIFF Боксу...OK
Версия Прошивки: 1.49 (RIFFBOX1), Версия JTAG Manager: 1.77
Выбран Ресурректор: [Samsung G532G ISP V1.0.6482.19990]
Connecting to the SD/eMMC Card...OK
Выставленное I/O Напряжение 1.86V, SD_CLK Frequency is 960 KHz
Detected eMMC Chip, ID: 0x90/0x4A (H8G4u ), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)
Selected Resurrection Data for the eMMC Chip with Capacity = 7,28 GB
Флеширование мертвого тела...ОК
Восстановление завершено!
Comment
-
This is all I'm getting, can't go any further:
Open serial port...OK
Connecting to the RIFF Box...OK
Getting RIFF Box Info...OK
RIFF Box Bootcore Version: 2.01 (RIFFBOX2)
Connecting to the Updates Server...OK
Downloading new Firmware from Server...OK
Setting Update Mode...OK
Updating Box's Firmware...OK
Restarting box, please wait...OK
Firmware Update Completed OK
Current Firmware Version: RECOVERY (RIFFBOX2)
Comment
-
20.04.2018
RIFF Box eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v4.06
-------------------------------------
- Improved partitions parsing for some devices with Tegra MCUs-style layout
- Improved partitions parsing for some devices with MTK MCUs-style layout
- Fixed bug when previously loaded good dump influenced the new loaded invalid dump
Note that on some MTK dumps it may show errors (in case of to us unknown layout). If that happens, please upload such file here so we can add support for it. This can be case if MBR is placed on random position (usually older MTK MCU-s).
Comment
Comment