G532m resurrection ok but no power

[abraham229]

Just a moment...
and flash it. i hope it work or download your county firmware.

it wont work, still the same wrote everything but still not boot up

[Legija]

Just a moment...


This file should work with SP Flash tool, try it.

[abraham229]

Just a moment...


This file should work with SP Flash tool, try it.

i already downloaded, but how i do to spflashtol recognize it? where is the scatter file?

[Legija]

Save this file to "RepairPacks" folder in RIFF install dir.
Start JTAG Manager - select "Samsung G532M-test".
Click resurrection and wait to finish. If stops at any point, click resurrection again and select "Continue".


This will restore everything in phone but system, cache and userdata.


Preloader supports Your phone chip name, so there should be no problems.




Samsung_g532M-test.riffpkg

[VIPER_GE]

so, find same phone and make dump.

[abraham229]

wrote into the phone and nothing still wont boot up, the strangest thing is that with this package it wont recognized as mtk usb port anymore

Save this file to "RepairPacks" folder in RIFF install dir.
Start JTAG Manager - select "Samsung G532M-test".
Click resurrection and wait to finish. If stops at any point, click resurrection again and select "Continue".


This will restore everything in phone but system, cache and userdata.


Preloader supports Your phone chip name, so there should be no problems.




Samsung_g532M-test.riffpkg

[Legija]

Write preloader to boot partition 1 now.

[abraham229]

Write preloader to boot partition 1 now.

do i write from the original software, or from the test package? and how i do to write preloder?

[Legija]

Sorry I was out today.


I already explained how to write firmware/bootloader files using eMMC plugin.
Lets do it again:


1. Download official bootloader and other firmware files for Your model and make sure You have PIT file, either in phone or separate file.


2. Start eMMC plugin and click "Parse connected eMMC"
If PIT is detected in phone, partition list will be loaded.
3. Click "Parse official firmware" and select *tar.md5 file (example: BL_G532MTVJU1AQK1_CL12559691_QB15707555_REV00_user _low_ship_MULTI_CERT.tar.md5)
4. Load more files if You want (CP_xxx or AP_xx)
5. Click "Flash Selected"


If there is no PIT file detected in eMMC, You need to get pit file for desired model and simply parse PIT file first, while following other steps.

[abraham229]

Sorry I was out today.


I already explained how to write firmware/bootloader files using eMMC plugin.
Lets do it again:


1. Download official bootloader and other firmware files for Your model and make sure You have PIT file, either in phone or separate file.


2. Start eMMC plugin and click "Parse connected eMMC"
If PIT is detected in phone, partition list will be loaded.
3. Click "Parse official firmware" and select *tar.md5 file (example: BL_G532MTVJU1AQK1_CL12559691_QB15707555_REV00_user _low_ship_MULTI_CERT.tar.md5)
4. Load more files if You want (CP_xxx or AP_xx)
5. Click "Flash Selected"


If there is no PIT file detected in eMMC, You need to get pit file for desired model and simply parse PIT file first, while following other steps.

already flash a fimrware by riff, and still not boot up, is there anything else i can do?

[Legija]

I'm not sure what was the initial problem in first place.


You can try to perform emmc test with SP Flash tool, so get the latest version and on "Memory test" page click > and connect phone (if phone enumerates as MTK USB port).
Maybe there is some hw problem.

[abraham229]

I'm not sure what was the initial problem in first place.


You can try to perform emmc test with SP Flash tool, so get the latest version and on "Memory test" page click > and connect phone (if phone enumerates as MTK USB port).
Maybe there is some hw problem.

the initial problem was pasword, the client bring it to me because of pasword, so i flashed this rom G532MMUBU1APIG, then the phone not boot up anymore, so i dont think that there is some hardware issue

[VIPER_GE]

you changed Preloader, what firmware had original, remember? you needed flash it without preloader. So, try flash same preloader with recovery and sec zone. after flash with Firmware Upgrade, if not helped, try with Format all + Update firmware.

[otherboy123]

Check power ic and there is some R Ic if these are remove or bad your phone still dead and u can't repair

[VIPER_GE]

Link