write scater mtk

[edy badot]

please help write scater mtk, if there is a tutorial video

[Legija]

1. Connect eMMC via ISP or adapter
2. Click "Parse connected memory
3. Click "Parse official firmware"
4. Click "Flash selected"

[edy badot]

ok,thanks

[Legija]

Keep in mind that phone must have valid GPT (or bmtpool if it's mbr styled) to properly address each partition.
Some custom made scatter files have all addresses wrong.


Basically, it's enough to upload preloader to boot partition 1 (depending on vendor it may need header 0x800 sized) and after that SP Flash tool can be used.