Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.63
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.86V, SD_CLK Frequency is 2.50 MHz
Detected eMMC Chip, ID: 0x15/0x00 (NJS00M), User Area Partition = 0x0000E8400000 Bytes (3.63 GB)
Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000001FFFFF
ERROR: DCC Loader has reported Error Code = 0x75 (0x00000A). Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.63
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.86V, SD_CLK Frequency is 2.50 MHz
Detected eMMC Chip, ID: 0x15/0x00 (NJS00M), User Area Partition = 0x0000E8400000 Bytes (3.63 GB)
Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000001FFFFF
ERROR: DCC Loader has reported Error Code = 0x75 (0x00000A). Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
Comment