Announcement

Collapse
No announcement yet.

HTC desire 310

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HTC desire 310

    please lay out the dump on this phone
    flush phone memory is not working
    emms plugin 4.11 does not partition the new flush

  • #2
    1. Connect emmc to RIFF Box
    2. Click "Check eMMC"
    3. Start eMMC Plugin:
    - Click "Parse Official Firmware"
    - Select scatter file
    - Click "Read from connected Device" to Set Boot and RPMB partition sizes, or do it manually according to information from step 2.
    - Wait for loading process to finish.
    - Click "Flash Selected"


    If You have v1 RIFF Box, to avoid waiting too long time, delete "system.img" and "userdata.img" partitions from ROM folder before loading scatter file.


    Code:
    Processed MTK Scatter File...OK
    Current Phone/Image File is recognized to have the MTK-Based Layout.
    
    Total quantity of listed partitions: 26
    
    Initializing Temporary Storage File for Boot Partition 1...OK
    Initializing Temporary Storage File for Boot Partition 2...OK
    Initializing Temporary Storage File for RPMB Partition...OK
    Initializing Temporary Storage File for User Area Partition...OK
    
    Parsed partitions List from the MTK Scatter File...OK
    
    Loaded Firmware File: "preloader_lx84.bin" into partition: <PRELOADER>
    Loaded Firmware File: "MBR" into partition: <MBR>
    Loaded Firmware File: "EBR1" into partition: <EBR1>
    Loaded Firmware File: "lk.bin" into partition: <UBOOT>
    Loaded Firmware File: "boot.img" into partition: <BOOTIMG>
    Loaded Firmware File: "recovery.img" into partition: <RECOVERY>
    Loaded Firmware File: "secro.img" into partition: <SEC_RO>
    Loaded Firmware File: "logo.bin" into partition: <LOGO>
    Loaded Firmware File: "EBR2" into partition: <EBR2>
    Loaded Firmware File: "blinkfeed.img" into partition: <BLINKFEED>
    Loaded Firmware File: "flex-Base.img" into partition: <FLEX>
    Loaded Firmware File: "system.img" into partition: <ANDROID>
    Loaded Firmware File: "cache.img" into partition: <CACHE>
    Loaded Firmware File: "userdata.img" into partition: <USRDATA>
    
    Partitions parsed from the Scatter File .................. 26
    Partitions which have files with content ................. 14
    Partitions with data loaded into current layout .......... 14
    The loaded data size (from firmware files) ............... 3.54 GB
    The total size of Partitions loaded ...................... 3.55 GB
    After flashing is finished, connect USB cable to phone and it should enumerate as MTK Device, so You can flash it using SP flash tool and write IMEI .
    Attached Files
    Last edited by Legija; 07-19-2018, 12:32 AM.
    ICQ: 299-912-089
    QQ: 1634811353

    Comment

    Working...
    X