Possible user data recovered from Full Disk Encryption type emmc
Announcement
Collapse
No announcement yet.
Full Disk Encryption
Collapse
X
-
Emmc Read info ok
Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "BJNB4R"
Package .............................. BGA
User Area Partition Size ............. 0x000747C00000 Bytes (29.12 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
ExtCSD Register Fields ............... [177] = 0x00, [179] = 0x48, [162] = 0x01
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1 Bit)
Chip Revision ........................ 0.7
Multimedia Card Revision ............. 1.8 (eMMC v5.1)
Serial Number ........................ 0x87A4B2A2
Memory Manufacturing Date ............ September, 2016
But emmc cant connect Useful plugin
(RIFFBOX1), JTAG Manager Version: 1.82
Selected Manual Mode: [JTAG, 4 MHz, 1 Bit Bus Width (DAT0), 1.80V]
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 4 MHz
Detected eMMC Chip, ID: 0x15/0x00 (BJNB4R), User Area Partition = 0x000747C00000 Bytes (29.12 GB)
Analizing the FullImage File:
Looking for the MBR Signature ................... ERROR
ERROR: Failed to read data from the connected Device!
Comment
Comment