Important - Rocker Box Modifications !

[legija]

Hello,

Thanks to RoxsAndy, its discovered that FTDI part design in box has few flaws, thus preventing box to work properly.

Problems caused by this design error were :

- Unstable speed
- Impossible to read flash from phones
- Communication glitches

To fix those problems, please do the following:

- Swap resistors R8 and R9
- Short circuit R9 to C10
- Solder capacitor 22pF between R7 and pin 8 of U3 IC
- Solder 22pF capacitor between R1 and R2

Please download attached photo of PCB with detailed instructions.

[Bartholo]

thanks for that information

[m2k606]

Gracias por la data.
Ya estoy comprando los elementos para hacer dicha reforma.
-----------------------------------------------------------------
Thank you por data.

I'm buying the elements to make this reform.


M2k-Mike
Miramar
Argentina

[m2k606]

Gracias Mr. Legija!

[Ronnie_GLD]

Thanks for the info!!

[silvio]

Thanks, legija...

[elarkangel]

ill try that ^^ thanks a lot

[bladearrowney]

Thanks for the info, will try this sooner or later.

Will updated RockerDongles with the hardware modification be made available on any of the resellers in the near future?

[bunker]

it doesn't let me download the image

[FU_Too]

it doesn't let me download the image

right click on mouse and "Save picture as" or "Save target as"

[incomtel]

I WILL PROCEED WITH THAT AND REPAIR ALL 4 ROCKER DONGLES I HAVE

Best Regards
aikon2000

[tornillo]

tnks for the information..

[slavisamob]

Thanks, legija

[slavisamob]

it doesn't let me download the image why

[phanthom2o4o]

Thanks for this sefull information....

BR

[alberto_ariel]

Thanks, legija !!!!!

[v60gsm]

Thanks Mr. Legija

[zoio]

My PCB is totally different!

It would have to post the schedule of it?

[Amaro]

thanx for this good info

[legija]

My PCB is totally different!

It would have to post the schedule of it?

If You have diferent PCB, then You probably not have described problems.

Only if You have problems to read flash from ODM models, You should make these changes.

Boxes produced by NarryTelecom have this error.

[Eurotel]

Thanks, legija

[Planet]

Thanks for update

[dmobile]

Thanks for that, but i just bought the box 2 day ago from ipmart, so i still need to fix the problem too

[ching]

Thanks, legija

[heh]

Appreciated informations.
Best Regards

[UnlockerPT]

thanks for the info!

[fone geeks]

Yes great , I am a tech , and I can see many repairers struggling to do this repair properly. Not a good production run. Maybe charge a few dollars more and get the proper engineering and production run. This box has killed more than it unlocks due to software issues or losing the phone during the unlock, and now this? Suggest customers think hard before buying , or pcb's get repaired BEFORE supplying...

[legija]

Yes great , I am a tech , and I can see many repairers struggling to do this repair properly. Not a good production run. Maybe charge a few dollars more and get the proper engineering and production run. This box has killed more than it unlocks due to software issues or losing the phone during the unlock, and now this? Suggest customers think hard before buying , or pcb's get repaired BEFORE supplying...

You are wrong - this box when not modified works perfectly with write mode.

Plus, with each box package, we provided prolific USB adaptor to be used with TI based phones. We have said numerous of times that with TI based phones use of prolific cable is required for best results.

Modifications which are required now will mostly serve for upcoming Samsung updates.

[catweezel]

thx 4 info !

[hmusa]

Yes great , I am a tech , and I can see many repairers struggling to do this repair properly. Not a good production run. Maybe charge a few dollars more and get the proper engineering and production run. This box has killed more than it unlocks due to software issues or losing the phone during the unlock, and now this? Suggest customers think hard before buying , or pcb's get repaired BEFORE supplying...

phone being killed with rocker dongle!!!hard to beleive!!