Need AC101 UBL USB cable Pinout.

[pablor1977]

Hi ppl, I need AC101 UBL USB cable pinout, the RJ45 pinout ofcourse.

Is the same as UB?

1 +5V Switchable 5V Flash Supply
2 TX output, data to phone
3 RX input, data from phone
4 CTS output, data to phone
5 RTS input, data from phone
6 M/C-BUS bi-directional 1 wire bus
7,8 GND

Coz I'm trying to build argon&rom4 exTP cable, so DTR and DSR signals are not presents here, that's why I'm asking....and they're needed in both versions of exTP cable.

Thanks, regards.-

[ODMSupport]

Man. tell me please- may be you try some time compare pennis with finger? if no - try to think where is difference.
cos same difference betwen Rocker by Legija and 7 month not supported fake UBL box.
Exist only one REAL box and this is NOT UBL!

[pablor1977]

OK I see the error....let's see

Here-> I need AC101 UBL USB cable pinout, the RJ45 pinout ofcourse

I mean this-> I need AC101 UB USB cable pinout, the RJ45 pinout ofcourse

And when I ask here -> Is the same as UB?
I mean if is the same pinout I wrote, wich is from UB.

The pinout of the Prolific USB-Serial RJ45 adaptor that came with Rocker Box.


I know there was an error, I'm sorry there was an f...ing L, but an apologize from you also would be nice to see I think.
I already know the difference between Rocker and Ultima Box Light, that's why I own a Rocker Box :smile5:

OK Now can you help me?

Regards.-

[ODMSupport]

Here-> I need AC101 UBL USB cable pinout, the RJ45 pinout ofcourse
Next time be more accurate cos here is ULTIMA BOX(original) support site and any links to fake box will be deleted without notice.

as for unibox cable pinout it`s same like for all usual Exxx Alcatels see attachment
as for pinout of unibox:
RJ45 unibox pinout

box top
1.....7 (direction depends from box. so need made measurement where is VPP in your box and related to this - chhange direction of count)

1: +5v
2: Tx (out)
3: Rx (in)
4: RTS (out)
5: CTS (in)
6: not used (MBUS in old unibox with F-bus/M-bus switch)
7: Gnd
8: Gnd

[pablor1977]

Here-> I need AC101 UBL USB cable pinout, the RJ45 pinout ofcourse
Next time be more accurate cos here is ULTIMA BOX(original) support site and any links to fake box will be deleted without notice.

as for unibox cable pinout it`s same like for all usual Exxx Alcatels see attachment
as for pinout of unibox:
RJ45 unibox pinout

box top
1.....7 (direction depends from box. so need made measurement where is VPP in your box and related to this - chhange direction of count)

1: +5v
2: Tx (out)
3: Rx (in)
4: RTS (out)
5: CTS (in)
6: not used (MBUS in old unibox with F-bus/M-bus switch)
7: Gnd
8: Gnd

Ok that's the same pinout I got, but DTR and DSR signals are not presents here, I asked this becuase I saw Smart-Testpoint for Smart-Clip that cames with RJ45, and I though maybe ExTP for Rocker Box can be also made with RJ45, to use with UniBox AC101 USB-Serial Prolific adapter with RJ45....but seems not, DTR and DSR aren't presents here, I just wanted to confirm that.
Thanks, regards.-

[ODMSupport]

For this phones you must have usual 3wires cable! GND,RX,TX nothing more.

[pablor1977]

For this phones you must have usual 3wires cable! GND,RX,TX nothing more.

What phones? I want to make exTP cable for Argon and ROM4 Unlock procedure...it's ok nevermind I see what I can do.

Thanks!

[ODMSupport]

So please ask right question in right place! now i understand what you need sch of box to get right RTS,DTR signals.
i get wrong info from AC101 cos think what you mean ALCATEL E101.
oki now all is clean so you can go to www.ftdi-chip.com to get datasheetl for FT232 if you use FTDI based box.

P.S. some time support team sleep too short to have good brain and read properly :) I am sorry for this - next time i read more carefully :)

[pablor1977]

So please ask right question in right place! now i understand what you need sch of box to get right RTS,DTR signals.
i get wrong info from AC101 cos think what you mean ALCATEL E101.
oki now all is clean so you can go to www.ftdi-chip.com to get datasheetl for FT232 if you use FTDI based box.

P.S. some time support team sleep too short to have good brain and read properly :) I am sorry for this - next time i read more carefully :)

Hehe no problem, english isn't my native language, that's why maybe you didn't understand also.

Thanks for reply, and thanks for support, now I have more idea were, and what to look for :hurray:

Regards!