Ultima Box R&D Client manual

[legija]

Hello,
Here is short manual for R&D Client.

http://www.ultimabox.com/images/R&DClient.jpg


You can download it either from Ultima Box home page, or from Turbo Support.
In order to get it working, You'll need a registered account at Turbo Support.

Open "Settings" tab, and fill out Your details as follows:

http://www.ultimabox.com/images/R&DClient_settings.jpg


Working with phones:

- Set phone model
- Press connect - after verifying login details popup box will apear, with list of firmwares. Select firmware which matches Your phone, and press "Continue" .

http://www.ultimabox.com/images/R&DClient_connect.jpg

-Client will boot the phone, and show following info:
Connected OK, Flash ID, Phone MSN (Mechanical Serial Number)

http://www.ultimabox.com/images/R&DClient_connected.jpg

Now You can select desired operation from drop down menu. Press "Execute" to get it done.

http://www.ultimabox.com/images/R&DClient_reading.jpg

After reading is done, the Client will open "Save" dialog, so now You can select folder to save the file:

http://www.ultimabox.com/images/R&DClient_save.jpg

After You have finished all read/write operations, You can press "Disconnect".

Now You can upload readed files to Turbo Support. Navigate to Ultima Box/Uploads folder. Upload Your file to coresponding folder, matching firmware from Your phone.

Thats it, i hope we will enjoy with this new feature. :)

Regards, Legija.

[luskao]

Hola,

A continuación mostraremos un pequeño manual para el cliente I+D.

http://www.ultimabox.com/images/R&DClient.jpg


Puedes descargarlo de la web de Ultima Box o bien desde Turbo Support.
In order to get it working, You'll need a registered account at Turbo Support.

Abre la pestaña de "Propiedades", y rellenala como a continuación:

http://www.ultimabox.com/images/R&DClient_settings.jpg


Trabajando con los telefonos:

- Elige el modelo de teléfono
- Pulsa conectar - tras verificar los datos de registro, una ventana popup aparecera con la lista de firmwares. Selecciona el firmware que corresponda a tu telefono, y pulsa en "Continue"

http://www.ultimabox.com/images/R&DClient_connect.jpg

-El cliente cargara tu telefono y mostrará lo siguiente:
Connected OK, Flash ID, Phone MSN (Mechanical Serial Number)

http://www.ultimabox.com/images/R&DClient_connected.jpg

Ahora puedes realizar la operación deseada de la lista desplegable. Pulsa "Execute" para realizarla.

http://www.ultimabox.com/images/R&DClient_reading.jpg

Una vez la lectura se ha realizado, el cliente abrira un dialogo para Guardar-Save, ahora podras seleccionar la carpeta para guardar el archivo:

http://www.ultimabox.com/images/R&DClient_save.jpg

Cuando hallas finalizado todas las operaciones de lectura/escritura, puedes pulsar "Disconnect".

Ahora puedes subir los archivos leidos a to Turbo Support. Navega por la carpeta Ultima Box/Uploads folder. Sube tu archivo a la correspondiente carpeta coincidiendo el firmware de tu telefono.

Eso es todo, espero que os guste esta nueva función :)

Un saludo

Luskao

PD:Creditos a Legija. Credits to Legija :)

[Wizo]

How does it work? because i cant use it? where connected the phone? my r&d client write please swich the phone on. whait... and nothing. please help me! cable now is good but nothing yet.

[zoli]

Have you installed p2k drivers?If not,do that...

[Wizo]

thx! work funny! :D

[Wizo]

Now i have that problem r&d client say mi login/pass mismatch, i follow the manual!
Why this prob? i have turbo support and that i can login. sorry my stupid:D

[gbluez]

Wizo, you're not alone. Me too :(
Mr. Legija, would you please explain why?

is it like this?

user: my login name at turbo support
pass: 0EBxxx86xx63Exxxx80EFxxxxxCA < my box id, without space and dash, right?

but it end up with login/pass missmatch...

Best regards

[Wizo]

Wizo, you're not alone. Me too :(
Mr. Legija, would you please explain why?

is it like this?

user: my login name at turbo support
pass: 0EBxxx86xx63Exxxx80EFxxxxxCA < my box id, without space and dash, right?

but it end up with login/pass missmatch...

Best regards
send in pm your box id to Legia and he solved your problem! :D

[DeDaMrAz]

Wizo, you're not alone. Me too :(
Mr. Legija, would you please explain why?

is it like this?

user: my login name at turbo support
pass: 0EBxxx86xx63Exxxx80EFxxxxxCA < my box id, without space and dash, right?

but it end up with login/pass missmatch...

Best regards

Or register your ultima box under a different user name (not the one you used allready) and use it to logon tu ubox R&D server.

[orbita]

Wizo, you're not alone. Me too :(
Mr. Legija, would you please explain why?

is it like this?

user: my login name at turbo support
pass: 0EBxxx86xx63Exxxx80EFxxxxxCA < my box id, without space and dash, right?

but it end up with login/pass missmatch...

Best regards
just read this
http://www.unlockforum.net/showthread.php?t=341

[gbluez]

@All, thanks you so much before. But i think i'll take it easy for now.
Regarding with my post here (http://www.unlockforum.net/showthread.php?t=587) and the announcement by mr. legija
here (http://www.unlockforum.net/showthread.php?t=546), I think i'll wait for Rocker. Im sure it will much more usefull for us. :)

Best Regards