Post Here Problems..

[GsmTracer]

FOR MOTO & NOKIA.. if i can i'll help :)

[tep_riu]

i was install skin on my phone, but it's fail and my phone is reset everytime, i can't connect, can't turn off......
is it die ??
i put "*#power" to bootloader and flash it (with RSD lite 2.4), but in process "loading ram downloaded for bootloader" >>> it's fail
here is this log :


00:29:54, December 17, 2006
Line: 1519
ERROR: Phone󞊰]: Error sending RAM download for bootloader. Device API Error: 0xE0030006 Address: 0x3FCC000 Command: ADDR
File: X:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

00:29:54, December 17, 2006
Line: 3701
ERROR: Phone󞊰]: Flash failed.
File: X:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

00:29:54, December 17, 2006
Line: 326
ERROR: Detailed Error Details for Device ID=0::Error Number=e0030006: [Big Grin] irection of the Error=1000::Command Value=200000::Code Group Number=257::Error Message=Error sending RAM download for bootloader. Device API Error: 0xE0030006 Address: 0x3FCC000 Command: ADDR
File: X:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp


please help me !!!
how i know my phone is v3i itune ??? can i flash it with MP itune ???

[GsmTracer]

try new version RSD lite. 3.0 or above for flashing.. (u can search in forum) and which file u used to flash? and what was boot loader ver? of your phone?

[tep_riu]

i use RSD 2.7 (down on 4room)
My bootloader ver : 0A.30
SW ver : R479_G_08.B4.38R
My MP i want to flash is : R479_G_08.B5.3DR_PDS005_LP0003_DRM0101_VSTUS_ENGLI SH206_JPJAVA_G_08_V3i_01_03_02R_GSPSLQACIN05NA132_ 1FF_MOTOX

R479_G_08.B4.34R_PDS005_LP0039_DRM0101_VSTGER206_J PJAVA_G_08_V3i_06_00_03R_SE7721AXXF1055_1FF_MOTOX

can i use it for flash ??? or can u tell me an other MPack ??? please !!!

[GsmTracer]

try to install your usb driver's again.. use latest version.. u can use that file np..if u need more version .. for new models moto may be need USB2.0 compatible..


http://www.planetmotox.net/razr_v3i.php
check there..

post results..

WBR.

[tep_riu]

thanz u, but my computer isn't a USB 2.0 compatible, it's very old :D
i will try it in services :D !!!
thanz U !!!

[leo_kaiser]

Hi, i got a problem with my v3i non-itunes, the displays are dead, i can make
an recive calls but i can`t see anything in the display, and i don`t know what
happend, they only went out, one day i open the phone it blinks and the displays turn off. if you can help me.

thanks.

[GsmTracer]

:) check phone is water logged / any liquid damage specially connector area.. check lcd , lcd flex , all are ok may be LCD driver faulty..(the one little big GLASS IC placed near lcd connector) you can short LCD driver same as v3..

[CPR2006]

I need some help. I keep trying to unlock a v3 razr an it keeps telling me, "ADDR Command Failed". It does all the other executions except for repair and unlock. What could be the problem? Also, I tried to connect a V300 and unlock it and it gives me the same error, "ADDR Command Failed". Could anyone help me please. I am also connecting them to their right bootloader version. Please help me. Thank you.

[GsmTracer]

problem is may be u do "connect" button used for unlocking i think so.. no need to use the connect button for unlock or pds repair.. just click the unlock button :)

[patosky]

FOR MOTO & NOKIA.. if i can i'll help :)

my nokia 3230 fell and stopped vibrating suddenly the backlight went off while i was trying to repair it it went off completely can you help

[GsmTracer]

my nokia 3230 fell and stopped vibrating suddenly the backlight went off while i was trying to repair it it went off completely can you help

what did u exact done? i didn't get u... pls explain.. are u a techie?? or noob?

[shailu19]

I have lost the "lock phone password" of motorola c168. How can i recover it?
Some people say i have to go to motorola service station; is that a must? would'nt it possible without going to service station?

[shoaib]

i have n 72 after rite pm show massage sim not valid
unlook with jaf massage sim data corrupted

MCU SW version: V 05wk07v42.2
13-04-06
RM-180
(c) Nokia.
HW version: 5001
PCI version:
RFIC version:  150a160f
DSP version: rolf_espresso_05wk07v28
Retu version: 32
Tahvo version: 52
Production serial number: CIJ148646
Product code: 0534977
Module code:
Basic production code: 0530940
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 359726000935194
IMEI spare to net: 3A 95 27 06 00 39 15 09
IMEI SV to net: 33 95 27 06 00 39 15 09 F1

LOCK STATUS:

CONFIG KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider
Key Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 00101F

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-180.ini
Saved INI not found, loading INI list...

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\359726000935194_CRT_backu p_1839205.pm
Done!
Backup LCK OK!
Setting local mode...
Reading simlock data...

LOCK STATUS:

CONFIG KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider
Key Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 00101F

Reading imei...
Reading codes data...
Found codes data...
Resetting phone...
Waiting for phone...
Reading soft info...
Reading simlock data...
Writing codes data...
Simlock data corrupted!
have any solotion plz help

[CPR2006]

Hello,
I was trying to log into my account today and got an error after I had forgotten my password. I got the password and when logged in it sad, "Sorry, but your account is restricted to 216.110.97.*, 72.22.*, 69.73.* IP ranges only.
Your current IP is 216.110.122.10."
This is not the first time it has happened. I have a network set up at home and I have my computer set on ip auto. I do not givet them a specific one. How could I get to log in as I need to download a flash file for the motorola L6. Please let me know ASAP. Thanks.

[GsmTracer]

Hello,
I was trying to log into my account today and got an error after I had forgotten my password. I got the password and when logged in it sad, "Sorry, but your account is restricted to 216.110.97.*, 72.22.*, 69.73.* IP ranges only.
Your current IP is 216.110.122.10."
This is not the first time it has happened. I have a network set up at home and I have my computer set on ip auto. I do not givet them a specific one. How could I get to log in as I need to download a flash file for the motorola L6. Please let me know ASAP. Thanks.



post right section... :)
http://www.unlockforum.com/forumdisplay.php?f=81

[GsmTracer]

i have n 72 after rite pm show massage sim not valid
unlook with jaf massage sim data corrupted

MCU SW version: V 05wk07v42.2
13-04-06
RM-180
(c) Nokia.
HW version: 5001
PCI version:
RFIC version:  150a160f
DSP version: rolf_espresso_05wk07v28
Retu version: 32
Tahvo version: 52
Production serial number: CIJ148646
Product code: 0534977
Module code:
Basic production code: 0530940
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 359726000935194
IMEI spare to net: 3A 95 27 06 00 39 15 09
IMEI SV to net: 33 95 27 06 00 39 15 09 F1

LOCK STATUS:

CONFIG KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider
Key Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 00101F

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-180.ini
Saved INI not found, loading INI list...

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\359726000935194_CRT_backu p_1839205.pm
Done!
Backup LCK OK!
Setting local mode...
Reading simlock data...

LOCK STATUS:

CONFIG KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider
Key Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 00101F

Reading imei...
Reading codes data...
Found codes data...
Resetting phone...
Waiting for phone...
Reading soft info...
Reading simlock data...
Writing codes data...
Simlock data corrupted!
have any solotion plz help


if you've a backup of lock area.. then can restore old pm. it will restore back your phone..
and be carefull with BB5 phones don't write full PM to this phones.. will cause lock area corrupt..

[jfa]

hi

i have a problem with N-70 and give this information

MCU Sw: V 05wk07v47 30-01-07 RM-84 (c) Nokia.
APE Co:
APE Va:
Prd.Cd: 0522157
Bpr.Cd: 0522156
Pro.Sn: SVJ326702
HW : 6012
APE Hw:
APE Ad:
RETU : 32
TAHVO : 52
RFIC : 150a160e

the phone dont start.only lights appear in display.can you help me?

thanks

[jfa]

hi

more information about the problem rm-84

CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0
00000000: 03 00 00 00 00 B1 72 ......r
ERR: APE 2nd Boot FbusMsg_C2: APE 2ND STRT no Info

[GsmTracer]

for n70 ape flash problem , try reballing ape flash ic or change it ( big flash chip mostly glued , little care full when removing )

[jfa]

hi

i will try to reballing ic flash.


thanks

[tiagotidus]

How to use java in W230